Rode RodeLink Wireless Filmmaker Kit

The lightweight bodypack clips to talent and features a locking 3.5mm connection to keep the lav secure. A 3-stage gain setting helps match input levels from quiet speech to loud dialogue. A single button handles mute/mute-lock/power, and an LED indicates battery and mute status.

The camera-mount receiver offers one-button operation and a detachable shoe mount that can be angled on-camera. The OLED screen shows key info for both units: battery, signal, mute status, and channel selection. A 3-stage output gain lets you reduce camera preamp gain for cleaner recordings with less hiss.

Units arrive pre-paired and automatically find a clean frequency when powered on—no scanning or syncing required. The receiver can wirelessly activate the transmitter’s mute-lock function to prevent accidental muting.

RØDELink Series II 2.4 GHz digital transmission continuously monitors and hops frequencies for stability up to 100.6 m line-of-sight. Audio is sent on two separate frequencies and the cleanest signal is used. Delivers 24-bit / 44.1 kHz audio, 35 Hz to 22 kHz frequency response, and 112 dB dynamic range.

4 ms max latency, 128-bit encryption, and the ability to swap belt clip and shoe-mount adapters between transmitter and receiver. Both units run on two AA batteries and can also be powered via USB.

Diversity

330' / 100.6 m

8

112 dB

4 ms

128-Bit

1 audio channel; Micro-USB (bus power); frequency response 35 Hz to 22 kHz; power via battery or USB bus power

1× bodypack; Micro-USB (bus power); programmable mute switch; plug-in power 4 V; frequency response 35 Hz to 22 kHz

Receiver: 30 Hours
Transmitter: 30 Hours

Package weight: 1.25 lb
Box dimensions (L × W × H): 7 × 5.2 × 5.05"